Name: Here you can assign a name to the
polyline/solid. This name will be displayed in the Solid Timing
command. Note that the name does not need to match the filename for
the solid (.mdl file).
Polyline: Clicking the Pick button will allow you to select a polyline. Note that only one polyline may be selected. Solids/polylines with pinpoints via the Assign Pinpoint to Solid command.
Solid: Clicking the Select button will allow you to select a .mdl file that represents the solid to be mined. Note that the polyline selected must be adjacent to or contained within the solid.
Precedence: Precedence rules may be applied to the solid to ensure timing is not calculated in an illogical or impossible progression. Any solids listed in the Precedence list will be mined prior to the current solid.
Keyboard Command: ASSIGNPLYSOLID
Polyline: Clicking the Pick button will allow you to select a polyline. Note that only one polyline may be selected. Solids/polylines with pinpoints via the Assign Pinpoint to Solid command.
Solid: Clicking the Select button will allow you to select a .mdl file that represents the solid to be mined. Note that the polyline selected must be adjacent to or contained within the solid.
Precedence: Precedence rules may be applied to the solid to ensure timing is not calculated in an illogical or impossible progression. Any solids listed in the Precedence list will be mined prior to the current solid.
Other solids may be added to the list by clicking the green plus icon.Pulldown Menu Location: Solid
Solids may be removed from the list by clicking the red X icon.
All solids may be removed from the list by clicking the Clear button.
Solids may also be added to the list by clicking the Screen Pick button. With this method, you will be able to select polylines from the drawing area rather than picking the names from a list.
Keyboard Command: ASSIGNPLYSOLID