This command draws text for the descriptions, surface elevation,
strata names, bed names, thicknesses, attributes, and/or bottom
elevations of the selected drillholes. Which values to draw is
determined by the selections in the dialog shown below. When bed
names are available they may be drawn next to the strata
name.
Text Layer: This option controls the layer that will be
used for the text labels. If the Use Drillhole Layer option
is selected, text labels will be drawn on the same layer as the
drillhole symbol. Note that strata layers may also be set according
to the "Layer Text by Strata" option.
Text Size: This option controls the size of the text
labels.
Decimals: This option controls the number of decimal
places in the values. If the strata attributes are defined in
Define
Attributes, the number of decimal places to report will respect
the attribute definition file.
Draw ____: These check boxes control which attributes of
the drillhole will be labeled. These labels are self-explanatory,
but a few notes on these options are provided below.
Use MText: This option will draw the label using an MTEXT
entity instead of a standard TEXT entity.
Draw Strata Elevation/Thickness/Depth: These options
control how the elevation/thickness/depth labels will be
drawn.
Starting Text Position: This option sets the row to start the text labels. By increasing this value, you can add additional labels without overlapping previous labels. For example, if the drillholes already have two rows of labels, then use a starting text position of three.
Text Offset: This option sets the distance from the
center of the drillhole symbol to draw the first text label. It is
recommended that this value be set to half the diameter of the
drillhole radius to prevent the labels from overlapping the
symbol.
Which Strata to Include: This option determines which
strata will be labeled. If the "Selected" option is chosen, you
will be prompted to select the strata to label. If the "Composite"
option is chosen, you will be prompted to select the strata to
label, but all selected strata will be grouped as if they were a
single strata.
Text Alignment: This option determines the placement of the labels relative to the drillhole symbol (right justified, center justified above the drillhole, center justified below the drillhole).
Use Parameter File: This
option allows you to select a parameter file to filter the
drillholes and draw text for only the drillholes that pass the
filter. See Define Parameters
for more on parameters.
Ignore Zero Value Attributes: This option will prevent
attributes with a value of zero from being labeled.
Draw Attributes on Separate Lines: This option will
create a new line for each attribute of each strata, otherwise the
attributes of a strata are grouped together on one line, but
separated by the Delimiter
field.
Group attributes by
strata: This option will draw all the attributes for a
strata together. Otherwise the attributes are grouped by attribute
name such as having all sulfur attribute values drawn
together.
Layer Text by Strata: When this option is enabled, the
layers used for each label will be set according to the layers
defined in the Strata
Definition File.
Draw Text At Elevation: This
option creates the labels at the surface elevation of the
drillhole. Otherwise, the text is drawn at zero elevation.
Draw Drillhole Text Dialog
Select the DrillHoles to label.
Select objects: pick the drillhole symbols
Choose Key Attributes to Draw Optionally choose attributes
to label.
Choose Non-Key Attributes to Draw
Pulldown Menu Location: Drillhole > Draw Drillhole
Text
Keyboard Command: chtext
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |