Check Lot Network Parameters

This command compares area and frontage of Lots associated with the current Lot Network file (.ltn) against user-specified area and frontage values.

Enabling the "Check ROW Offsets" option will also check for proper right-of-way distances using a specified centerline file (.cl) or (.rdn) file.

A detailed report is generated that displays the Lots that meet or do not meet the area and frontage minimums along with the coordinates of points along Lot frontage that violate the right-of-way value specified.

Minimum Lot Area: Specify the smallest acceptable area a Lot can be to "pass the test" and the appropriate unit of measure.

Minimum Frontage: Specify the smallest allowable amount of street frontage the Lot must have in order to "pass the test."

Check ROW Offsets: This setting allows you to specify the full right-of-way width for the road defined by the centerline file (.cl) you specify.

Note:

• To specify an alternate .LTN file, use the Lot Network Settings command.
• To "browse" over lots already in a drawing, use the Lot Network Inspector command.

Pulldown Menu Location: Area/Layout > Lot Network Utilities
Keyboard Command: lotnet_check
Prerequisite: A processed set of Lots created by the Lot Network routines