Import Network from Centerline/Profile

The Import Network from Centerline/Profile command allows a sewer file (*.SEW) file to be created by combining the horizontal components of a centerline (*.CL) file with the vertical component of a sewer profile (*.PRO) file. The process to create the sewer file is as follows:

1. The stationing contained within the centerline file is processed into memory.
2. The stations within the sewer profile file are located along the path of the centerline to form the structure/junction locations.
3. The pipe information stored within the sewer profile file are placed linearly between the structure locations.

The resultant sewer file can be further edited with the Edit Sewer Structure command or the Spreadsheet Sewer Editor command.

Note:

• Any stations within the *.PRO file that occur after the last station in the *.CL file are not written into the *.SEW file.
• Once the *.SEW file has been created, you can activate it for editing via the Set Sewer File command and/or draw it graphically via the Draw Sewer Network > Plan View command.

Pulldown Menu Location: Network > Sewer Network Utilities
Keyboard Command: swrclpro
Prerequisite: Centerline (*.CL) file, Sewer Profile (*.PRO) file