Performing Math Functions in Carlson SurvCE Input Boxes
|
Many input boxes in SurvCE allow the user to calculate math functions "on-the-fly".
To enter rod heights while in a GPS setup screen that is not in your current units (e.g. you’re using a 2 meter pole but working in U.S. Feet), key in the following:
The Rod Height followed by “M” for Meters, “FT” for Feet and “IFT” for International Feet (Without the quotes) followed by the [ENTER] key will convert the measurement into your current units (e.g. 2M = 6.5617).
To compute the azimuth from one point to another to automatically enter in the azimuth while using the “Point by Direction” option in “Point Store”, key in the following:
Point ID,Point ID (e.g. 1,2)
To add or subtract a value from the computed azimuth, key in the following:
Point ID,PointID+Angle (e.g. 1,2+90)
Or
Point ID,Point ID-Angle (e.g. 1,2-90)