Memory on most CE devices can be allocated for best results.  We recommend setting “storage memory” to a minimum of 16,000 to 18,000 KB.  The following discussion is an example for setting that memory .  An equivalent process should be used for other CE devices, as available.

The SurvCE controller will function better during topo and stakeout with the "Storage Memory" set to around 18,000 KB. To check and/or change the settings:

Hit the Blue Key and Start, then Settings => Control Panel => Double click on System => Touch the Memory tab => Slide the pointer toward the left, which is the Storage Memory side, so that the "Allocated" is around 18,000 KB.

Keep in mind that to upgrade software, this setting may need to be changed back, so that the "Program Memory" has more available. To change, do as above but  => Slide the pointer toward the Right, which is the Program side, so that the "Allocated" is around 18,000 KB. This assures that there is enough Program memory, so that the new updates can be saved.

Once the upgrade or additional software is added, you can change it back so that the pointer is more toward the Storage Memory -- around 18,000 KB.

After changing these settings, or updating software, it's a good idea to do a "Save System".