Points Menu

6.06  Go To  (GT)

 

FUNCTION:  The Go To routine is used to introduce a new currently occupied point into the COGO routines without clearing the Area Sum and Traverse Length accumulator variables.

 

Activate the Go To routine by picking from the Points menu; by pressing [Alt][P], [G] or by typing GT at any data entry prompt.

 

Enter the number of the currently occupied point Clear the point entry field Accept the entered point and continue Help for this routine

 

Point:  Type a point number and press [Enter] or [Tab].  To enter an alpha-numeric point number (e.g. PIN3456, or 22S30) you must precede the point number with an apostrophe ( ' ) to alert "Sight" Survey that you are not attempting to enter a two-letter command to change routines.  For example: 'PIN3456, or  '22S30. 

 

Press [Enter] or click [Go] after entering the data.

 

TIP: Left-click the [Pts] button to select a point from the Point Manager (PM - Section 6.09).  Right-click the [Pts] button to select a point from the CAD window (see Picking Points in CAD in Section 2.03).

 

If the point has not yet been assigned coordinates, the program will request them.  Follow the Enter and Assign procedure (EA - Section 6.01) to assign coordinates and a description to the point. 

 

"Sight" Survey will print the word GOTO followed by the point number, ID, Northing, Easting and elevation into the Text Output window.

 

NOTES:

1.  This routine does not clear the Area Sum and Traverse Length accumulators.

2.  You should not use this routine when running any area calculations.