The
above starting linework for 3D conversion
This command will extrude the linework to either the thickness
from a flat base, or to a roof and floor defined by either fixed
elevations, coal sections, or elevation grid files as set by the
Mine Height Method in the dialog. The input layers are
defined so that the program knows what layers to look for. For the
Draw 3D Faces option, the Output Layers are defined for the new 3D
faces that are to be drawn in the assigned layers. The Output
Solid Model option creates an MDL file.
Once the 3D faces have been drawn, they can be viewed in the 3D
Viewer Window under the View menu. In the Settings tab, the Shading
Mode can be set to Both so that both the top and bottom of the
faces will be rendered.
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |