This command creates points to fill a void in a point cloud such
as the opening of a tunnel where there are no points from the
scanner. The program prompts for three points around the perimeter
of the void area. These points are used to define a 3D plane and
the new points are created on this 3D plane. In the dialog, the
Point Interval is the distance between the new points to create.
The Sample Width is the distance from the 3D plane that the program
uses to search for existing points to define the perimeter of the
void area. The Point Layer is used for the new points.
Pulldown Menu Location: Solid> Solid Utilities
Keyboard Command: gap_pts
Prerequisite: points
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |