This command will process a group of
points to compute the best fitting line by least squares. The
points can be selected by screen selection of point entities, point
number, point group name, screen pick or polyline vertices. The
program can calculate either a 2D or 3D line. There are options to
best fit with nothing held (None), to best fit by holding a point,
and to best fit by holding a bearing. All three options are shown
below in the graphic. When holding a point, you are prompted to
enter the weight for the point. In this example, a weight of 1000
caused the line to pass to within 0.025 of point 111. With a weight
of 5000, the line passed to within 0.005 of point 111. Increase the
weight accordingly to obtain the desired precision. When holding a
bearing such as N45E, you are prompted to enter the bearing in the
form QDD.MMSS (e.g. 145.0000 or just 145). The program generates a
standard report. The residual for each point is the perpendicular
distance from the point to the best-fit line.
After specifying the points, the
program calculates the best-fit line and shows the results in the
image shown here. You can toggle each point for whether to include
in the calculations. Points with Process set to No and not used for
calculating the line but are still included in the report of
residuals. Use the Remove button to remove a point both from
calculation and reporting. Use the Add button to add another point
into the calculations.
The Create Two Parallel Lines option
applies when the points are for two line that are meant to be
parallel such as a right-of-way. The program takes input for the
distance between these two lines and then automatically sorts the
points between the two lines, reports the residuals for the two
lines and draws the two lines.
Select points from screen,
group or by point number
[<Screen>/Group/Number/Pick/Line]? Press Enter for Screen
Options Dialog
Select Carlson Software Points.
Select
objects: pick the five points
Point numbers
(Enter to continue): press Enter
Parameter to
hold [<None>/Point/Bearing]: P
Enter point
number to hold:111
Enter weight for point:
5000
Sample Report:
Best Fit Line By Least Squares
Holding point 111: (5227.721,5149.482)
Coordinate File> c:\data\interval.crd
Source Coordinates
Point# Northing Easting Residual
109 5103.542 5182.098 10.050
110 5114.634 5191.928 6.921
111 5149.482 5227.721 0.005
112 5178.703 5268.237 0.400
113 5201.666 5312.602 8.129
Residuals Standard Deviation: 6.559
Bearing: N 53d44'07" E
Distance: 163.266
Pulldown Menu Location: COGO
Keyboard Command: bfitlinelq
Prerequisite: Group
of points to sample
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |