This command reports the areas of the surface within different
slope ranges. The surface is defined by a cross section file (SCT).
The option to Use Another Section For Cut/Fill Reference
reports the cut/fill areas and volumes within given ranges of
slopes.
Select Section to Process
Select .SCT file
Select Slope Zone dialog
Report slope or horizontal area
[<Horizontal>/Slope]? S
Slope format [<Percent>/Ratio]? press
Enter
Greatest slope % of zone 1:
10
Greatest slope % of zone 2: press Enter
Starting station to process
<0.000>: press
Enter
Ending station to process <1514.567>: press
Enter
The Standard Report Viewer
creates a report called Section Slope Zone Analysis
Report.
Section Slope Zone Analysis
Section File: C:\src\work\output.xsct
Starting Station: 0+00.000
Ending Station: 15+14.567
Slope %
Area(SF) % of Total
0.0 to 10.0 78757.5
61.3
> 10.0
49617.0 38.7
Total:
128374.5
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |