This command assigns descriptions to existing section points in a
section file at specified offsets. Besides the specified offsets,
the description can be set for the section point with the farthest
left or farthest right offset.
Set description for left most offset [Yes/<No>]?
Y
Pulldown Menu Location:
Sections > Section
Utilities
Prompts
Description:
TIE
Set description for right most offset [Yes/<No>]?
Y
Description:
TIE
Offset to set description (Enter to end):
12
Description:
EP
Offset to set description (Enter to end):
press Enter
Keyboard Command: sct_desc_offset
Prerequisite:A section file
| Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |