This command tags polylines with a description so that Triangulate & Contour can identify these polylines as hard breaklines. The tag is invisible and doesn't change the polyline. Triangulate & Contour will not smooth the contours as they cross these hard breaklines, even with contour smoothing turned on. For example you could tag 3D polylines that represent a wall or a curb so that the contours go straight across without smoothing curves. If contour smoothing is turned off, this tag had no effect.
Select hard breakline polylines. (For no smoothing in
Triangulate & Contour)
Select objects: Select
breaklines to tag
Select objects: press
Enter to conclude selection
Set 14 polylines as hard breaklines.
Pulldown Menu Location: 3D Data >> Hard Breaklines
Keyboard Command: hardbrk
Prerequisite: Polylines
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |