Using the Register command will look at position
differences between the Control
Points (presumed to be correct in World Space) and either
the Coordinate
Points, or a list of Target
Points from a Scan Position (either of which can be written
to via picking points in Create Point
mode.
To register a cloud, click on the Cloud in the Current
Project tree and select Register.
Enter a name for the new, registered Cloud.
From the Match Control Points To drop-down menu, select
whether to use Coordinate Points or Targets Points
from a Scan Position.
There are four registration methods available; Use existing
references, Match point names, Match point
descriptions and Minimize point position error. If
selecting Minimize point position error, the Registration Settings
panel will activate and users can set Maximum Error,
Minimum References and toggle Update target point
names, Update target point descriptions and whether to
Allow Scaling.
When satisfied, click the Green Tick to begin the
registration.
PointCloud will then transform the whole Cloud to align the points
selected, creating a new point cloud. The new cloud will be
displayed under the Clouds sub-menu in the Current
Project tree.
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |