The Carlson programs are loaded when the Carlson menu is loaded.
The Carlson menu is named cs##base.mnu (for AutoCAD 2005 and
earlier) or cs##base.cui (for AutoCAD 2006 to AutoCAD 2009) or
cs##base.cuix (for AutoCAD 2010 and later) where the ## is the
version of AutoCAD or icadbase.mnu for IntelliCAD. For example, in
AutoCAD 2014 the Carlson menu name is cs14base.cuix. The Carlson
menu is located in the Carlson SUP folder. The Carlson installation
and desktop icons should automatically setup AutoCAD to load the
Carlson menu. To manually load the Carlson menu, first make sure
that the Carlson SUP folder is listed in the Support File Search
Path under AutoCAD or IntelliCAD Options. Then run the menuload or
cuiload AutoCAD command or the menu IntelliCAD command and load the
Carlson menu. The Carlson SUP folder is under the Windows user
folder such as:
%appdata%\Carlson Software\Carlson_Version\CAD_Version\SUP
The Carlson menu has over 80 pull-down menus for the different
Carlson programs. Each program has its own set of pull-down menus.
The menu set for one program is active at a time. To switch current
program menu, choose the menu from Settings>Carlson Menus or
choose from the Modules toolbar.
By default, the Carlson menu is setup as the Main Customization
File in AutoCAD. To setup the Carlson menu as the partial menu,
1. Start AutoCAD with Carlson by using the Carlson desktop icon
2. Run CUILOAD and unload all the menus. Then load your Main
Customization File. Then load the Carlson menu.
3. In Carlson Configure->Startup Settings, turn on No Menu
Reset.
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |