This command combines the polyline perimeters of two neighboring
watersheds into a single polyline. The original two polylines are
erased. The original polylines must have a common side and must be
closed polylines on the layer of Watershed Linework Layer defined
in the Define Watershed Layers command. To select the watershed
polylines to merge, the program prompts to pick a point inside the
watershed area.
Pick inside 1st watershed: pick a point
Pick inside 2nd watershed: pick a point
Pulldown Menu Location: Watershed
Keyboard Command: wshed_merge
Prerequisite: closed polylines on watershed layer
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |