This command is an alternative method to the Edit Sewer Structure command for editing existing sewer networks in a tabular format. Data changes can be applied more quickly in the spreadsheet editor and the content and position of displayed data is customizable.
Show Lateral Lines:
Select Lateral Main Pipe Line
Select Pipe Line: Select the sewer reach that will be displayed in the dialog box or enable the Select All Pipe Lines toggle to display the entire sewer network.
Show Whole Pipe Line:
When enabled, the entire sewer network reach
of the selected pipe is displayed.
Display Direction:
To Display the network in either downstream to
upstream or upstream to downstream direction, in order to match the
Design Direction.
Design Direction: When downstream to upstream is selected, change a pipe's downstream invert elevation, its upstream invert will be updated automatically by pipe slope; otherwise change a pipe's upstream invert to update its downstream invert by pipe slope.
Vertical Exag: Indicate the desired amount of vertical exaggeration to be applied to the selected pipe display.
Edit Multiple Pipes: To globally change the value within a given column to a specific value, "click and drag" or use standard Windows shift+click functionality to select a range of cells within a given column and then click Edit Multiple Pipes.
Pipe at Junction Match By: Indicate the method by which pipes are vertically aligned at each junction:
Pipe Profile Edit Actions: Indicate what should happen when Hydro Calc is clicked:
Hold Pipe Slope: Indicate how to manipulate the slope of the identified pipe(s):
Edit Actions: Set the desired method of how the sewer network should be adjusted when the Hydro Calc button is clicked.
Spreadsheet Display Settings: Enable the options for the value(s) you would like displayed in the Sewer Spreadsheet Editor and position each them using the Move Up and Move Down buttons.
Display Slope In: Indicate the unit of measure to be used for the display of
the pipe slope.
Elevation/Distance: Decimal Place
Value for rounding, use drop down arrow for settings Round
Elevation to the Decimal place.
Hydro Calc: The hydraulic calculations are performed on the network and the results are displayed.
Report: This option allows data or graphical reports of the network to be generated.
Report Output: Indicate the desired type of report output:
Draw Profile for Each Pipe
Separately: When enabled, each pipe is
detailed into the report as illustrated above. When disabled, each
reach of the sewer network is drawn into the
report.
Profile Grid Settings: Set the
desired Grid Setting to be used in report.
Manhole Text Orientation: Can be
toggled between Horizontal or Vertical for display in the
report
Page Setup: Allows the look and size of the eventual PDF report to be customized using the standard Carlson PDF Report Generator.
Pulldown Menu Location: Network
Keyboard Command: sizeswr
Prerequisite: A sewer (.SEW) file, a surface (.TIN, .GRD,
.FLT) file
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |