This command reads a sewer network file and reports its design
parameters and hydraulic results. Select Report Sewer Network from
the Network menu in the Hydrology Module, the report dialog
displays. The Select Sewer Line(s) To Report list displays
all upstream entrance structure names, which represents pipe lines
from every entrance to the outfall. Select one entrance to report
one pipe line. If you want to report the whole sewer network, turn
on the Report All Sewer Lines toggle. Select one or multiple return
periods for reporting. The Settings dialog allows the user
to set decimal variables to Station, Elevation / Depth, Pipe
Length, Pipe Slope, and Other for precision.
The sewer network report has four categories: Inlet,
Pipe, Structure and Drainage, in order to
report all information thoroughly.
Report Subareas lists subarea type, area, runoff
Coefficient and increment Runoff Coefficient for every
catchbasin.
Custom Report allows you to choose which portion
of data you would like to report from the combination of drainage
and pipe categories.
Report HGL Computation lists the result of the friction
losses of every pipe and the junction losses of every
structure.
Report Inlet Computation reports the drainage runoff and pavement parameters, and the result of the gutter and inlet calculation for every surface inlet.
Simple Report lists some portion of information from all
four categories.
Report Water Surface Elevation for Sag Inlets lists the
orifice and weir calculation of the sag inlets.
Report Lateral lists the data for lateral connections.
Check the Use Report Formatter toggle to report the sewer
network data in a Microsoft Excel spreadsheet or as a Table Entity
in the plan; otherwise in the standard Carlson report window from
where the information can be edited, printed to a printer or to the
screen, and saved.
The PDF report allows you to report sewer data and
results by various PDF report templates. Currently we support
Inlet, Structure and HGL Computation PDF
report based on PDF report templates come with the install.
|
Sewer Network Report
Dialog |
Sewer Network Report Example:
Subarea Report |
Report Sewer Network dialog: Fill in values.
Pulldown Menu Location: Network > Report Sewer
Network
Keyboard Command: reportswr
Prerequisite: a sewer file (.SEW), a surface file (.TIN,
.GRD)...\USER\RainLib.dta, ...\USER\inlet.dta,
...\USER\pipesize.dta (mpipesize.dta in Metric unit),
...\USER\swrStruct.dta
Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |