Angle Info

This command reports the interior and exterior angles defined by two joining line segments or by three points. The coordinates, angles and distances of the line segments are also reported. The report is display in the standard report viewer. When the input points have different elevations, there is an option to report the angle in 2D or 3D. For 2D, the elevation are ignored. For 3D, the points are projected onto a plane to report the 3D angle.

Angle Information

              Point#    Northing     Easting

Start Point:  11        4728.73      5660.09     

Corner Point: 12        4684.89      5624.99     

End Point:    13        4664.02      5690.60     

              Bearing        Distance

First Side:   S 38°40'56" W  56.16

Second Side:  S 72°21'16" E  68.85

Interior: 68°57'48"

Exterior: 291°02'12"

Prompts

Define angle by, Points/<select line or polyline>: P for points
1st Point?
Pick point or point number: 11
2nd (Corner) Point ?
Pick point or point number: 12
3rd Point?
Pick point or point number: 13
Interior: 68°57'18"  Exterior: 291°02'42"
Angle Info Report Viewer
1st Point (Enter to end)?
Pick point or point number: press Enter