Data Capture From CAD Properties
This command capture CAD properties data from selected entities
and assigned them to entities's GIS values. The user needs to
select GIS Feature from the drop down button and add the desired
fields from the right combo box to the left combo box.
Then the user need to match the GIS field with CAD
Properties.
The available CAD properties are area, length, layer and
elevation. Only closed polyline can assign Area to the GIS
data.
After the selection, the entry in the Used Fields will have the
format of <CAD
property>=<GIS
attribute>. The following picture shows
"Length=Perimeter"
Prompts
Select linework entities: select linework
Pulldown Menu Location: GIS Data > Data Capture
Keyboard Command: giscaddata
Prerequisite: Linework and defined GIS feature