This command will compute curve data and draw it in tabular form
using the settings specified in Table Defaults. The program
computes the curve data from an arc entity, an arc segment of a
polyline or from specified points on an arc. The curve data includes
radius, length of curve, chord length, chord bearing, tangent and delta
or included angle. The user is prompted for curve number (default is
sequential starting with 1) and the starting point of the table. The
curve is labeled with a C#, where # is the sequential curve number.
After picking the starting point of the table, the placement point for
the other table entries will default to the next position and you can
just press Enter unless you want to relocate the table.
The current curve table numbers are remembered between drawings. The Auto Annotate command can also create curve tables. Use the Table Header command to draw the column header of the curve data names.
Define arc by, Points/<Select arc or
polyline>: pick an arc
Enter curve number <1>: press Enter
Starting point of curve table text <(5000,5000)>: pick
a point in a clear area of the drawing
Define arc by, Points/<Select arc or polyline>: pick
another arc
Enter curve number <2>: press Enter
Starting point of curve table text <(4030,4490)>: press
Enter to use next position
Define arc by, Points/<Select arc or polyline>: press Enter
to end