Next you are prompted for the file
name of the centerline to plot.This command reads a centerline (.CL) file and plots it as a 2D
polyline in the drawing at the proper coordinates. First you are
prompted for the layer name for the polyline to be created. There
is also an option to specify whether to draw PI lines and specify
their length. The Label Centerline option draws station labels
using a .STA settings file created by the Save Settings function in
the Station Polyline/Centerline command.
Next you are prompted for the file
name of the centerline to plot.
The .CL file can be made with the following commands on the
Design menu: Polyline to CL File, Centerline Editor or
Design Centerline. Drawing the centerline file is a way to
check the .CL file data graphically for correctness. If a spiral
exists in the .CL file, the spiral will be represented by polyline
segments.
Draw Centerline Options dialog
Centerline File to Draw file selection dialog Select the .CL
file name to read and plot.
Pulldown Menu Location: Centerline
Keyboard Command: cl2pline
Prerequisite: a centerline file
| Converted from CHM to HTML with chm2web Standard 2.85 (unicode) |