This command creates a solid model from a collection of x,y,z
points using the "advancing front" 3D triangulation method. The
points need to cover all sides of the surface (top, bottom, left,
right, front, back).
Min Edge
Length: Sets the minimum length of a triangle edge in the
solid. When there are several points closer than this distance to
each other, some of these points will be left out of the solid
model.
Max Edge Length: Sets the maximum distance for 3D
triangulation to connect points.
The rest of these options apply to expanding and improving the
solid after the 3D triangulation has connected all the points that
it can.
Extrapolate Across Gaps: looks for large gaps in the input
data and uses a Poisson model points to fill in those gaps.
Remove Dangles: removes triangles that are not connected to
the majority of the solid model.
Apply Advancing Front: expands the solid by adding triangles
to unconnected edges.
Fill Holes: triangulates across small holes in the
solid.
Points to Solid options dialog
Select points to process.
Select objects: pick points
Solid File To Write Select MDL file
Pulldown Menu Location: Solid
Keyboard Command: pt2mdl
Prerequisite: points