This command locates a point by turned angle and distance.
Define occupied & backsight points by [L]ine or [P]oints
<P>: L
Select Line or Polyline near end point that defines occupied
point: select line
Occupied point: (4078.44 4610.89 0.0)
Backsight point: (4390.31 4869.06 0.0)
Enter Angle (ddd.mmss) <45.2349>: 22.5632
Pick or Type Distance <188.27>:
40.32
Enter Vertical
Angle (dd.mmss) <0.0000>: hit Enter
Pulldown Menu Location: COGO > Locate by
Bearing-Ang
Keyboard Commands: turnang2, ta
Prerequisite: None