This command labels the distances of a point to one or two lines. The first distance is between the point and an east-west line. This distance is labeled as either north or south of the line. The second distance is between the point and a north-south line. This distance is labeled as either east or west of the line. The distances are labeled with a leader and a description of the point.
Pick 'E-W', Left to Right Property Line (if any)
Pick Line or Polyline (Enter for None): pick the
polyline
Pick 'N-S', Top to Bottom Property Line (if any)
Pick Line or Polyline (Enter for None): pick the
polyline
Pick Offset Point, (N) for Number, <E> to Exit:
pick a point
Pick point to start leader at: pick a point at or near
the offset point
To point: pick an alignment point for the label
To point: press Enter
Pick Offset Point, (N) for Number, <E> to Exit:
press Enter to End
Pulldown Menu Location: Annotate
Keyboard Command: offlab
Prerequisite: Polyline or Line