This command checks whether pit polylines overlap each other.
Pits should never overlap since this would lead to extra volumes
with the quantities in the overlap area getting reported twice. The
program reports any overlaps at the command line.
Select pit polylines to check.
Select objects: pick the polylines
Pits P--100 and P--101 overlap at 1501884.209,506497.414
Pits P--101 and P--100 overlap at 1504444.952,509533.437
Found 2 overlaps between 56 pits
Pulldown Menu Location: Boundary > Pit Polyline
Tools
Keyboard Command: pitcheck
Prerequisite: pit
polylines