This command defines a collection of line styles. Each line
style has a Name for a description, Color and Linetype. The Double
Line option is for line styles of two parallel lines. The Linetype
can be Solid for continuous line styles or Dash. For Double Lines,
the Linetype can also be a solid on one side and dashed on the
other such as for passing zones on the center double yellow line.
For Dash Linetypes, the Stripe Length and Gap Length control the
length of the dash and spacing between the dashes. Use the Add,
Edit, Delete and Move Up/Down buttons to manage the list of line
styles.
When the line styles are defined in the library, use the Draw
Road Stripes command to create the line styles in the
drawing.
The current Road Stripe Library is stored in the current USER
folder under Documents & Settings in a file called
stripelib.dta. The Load and SaveAs functions can be used to store
and recall the stripe library to a .RSL file for archiving or
sharing.
Pulldown Menu Location: Roads
Keyboard Command: stripe_lib
Prerequisite: None