This command reports pipe data tagged to polylines by the Draw
Pipe 3D Polyline or Assign Pipe Data To Polyline commands. There
are two methods. The Pick method prompts to select a polyline and
reports its data. The Search method checks all the polylines in the
current drawing and reports all the pipe data from the drawing and
highlights the pipe polylines.
Pick polylines to check or search drawing
[<Pick>/Search]? press Enter
Select pipe polyline: pick a polyline
Polyline is set as pipe. Size: 12.0" Reference: Bottom
Select pipe polyline (Enter to end): press
Enter
Pulldown Menu Location: Profiles > Profile
Utilities
Keyboard Command: id_pl_pipe
Prerequisite: Pipe polylines