Import Network from Centerline/Profile
The Import Network from Centerline/Profile command allows a
sewer file (*.SEW) file to be created by combining the horizontal
components of a centerline (*.CL) file with the vertical component
of a sewer profile (*.PRO) file. The process to create the sewer
file is as follows:
- The stationing contained within the centerline file is
processed into memory.
- The stations within the sewer profile file are located along
the path of the centerline to form the structure/junction
locations.
- The pipe information stored within the sewer profile file are
placed linearly between the structure locations.
The resultant sewer file can be further edited with the Edit Sewer
Structure command or the Spreadsheet
Sewer Editor command.
Note:
- Any stations within the *.PRO file that occur after the last
station in the *.CL file are not written into the *.SEW file.
- Once the *.SEW file has been created, you can activate it for
editing via the Set
Sewer File command and/or draw it graphically via the Draw
Sewer Network > Plan View command.
Pulldown Menu Location: Network > Sewer Network
Utilities
Keyboard Command: swrclpro
Prerequisite: Centerline (*.CL) file, Sewer Profile (*.PRO)
file