This command allows you to select a structure or a pipe on a
profile and make fast, easy edits to a sanitary\storm network
(*.SEW). These edits will automatically update the network file
(SEW), update the profile drawn, and update other design features
such as Energy Grade Line (EGL) and Hydraulic Grade Line (HGL) data
as long as the feature to Save to Profile File when drawing the
profile is active.
When making profile edits you can select either a structure or a
pipe to edit. When a structure is selected, you can make
elevation edits to the selected structure. When a pipe is selected,
there are options to modify the pipe invert in or invert out by
selecting on the appropriate end of the pipe, or by selecting the
middle of the pipe to hold the pipe slope and move the entire pipe
for vertical revisions.
First select the structure to edit. The following dialog box
will open showing the Old Elev: and the New Elev: for the structure
invert elevation. You can then enter new elevation or pick a point
for elevation on screen. You can also edit the structure rim
elevation by typing R for Rim at the command line. Structures can
only be edited in the profile vertically.
Select sewer entity to move (Enter to
End): pick a structure
Enter new elevation or pick a point for elevation [Rim
Elevation](Enter to End): pick elevation
Select sewer entity to move (Enter to End)
[Undo/Exit]: pick a pipe
Enter new elevation or pick a point for elevation [Size/STepup]
(Enter to End): pick elevation
Select sewer entity to move (Enter to End)
[Undo/Exit]: press Enter
Pulldown Menu Location: Network > Edit Sewer
Structure
Keyboard Command: sewer_prof_grip
Prerequisite: A sewer (SEW) file and saved (PRO) profile
pipes.