When there are two or more sewer networks in one area, it's very
important to know if there are any collisions among pipe lines. The
Collision Conflicts Check command performs a three dimensional
check on unlimited sewer .SEW and utility .UTIL networks. If any
portions of the these systems are too close to each other, i.e
their distance is closer than the safety buffer, the conflicting
pipes and their collision locations would be reported. The program
also checks for any collisions within the same sewer network.
Besides checking unlimited sewer networks, the Check Pipe 3D
Polylines option will check for collisions with 3D polylines that
have been tagged as pipes with the Assign Pipe Data To Polyline
command. Any utility pipe
From the Network > Check Sewer Network menu in the Hydrology
Module, select Collision Conflicts Check. In the dialog, select two
or more network files that you want to check the collisions and/or
turn on the Check Pipe 3D Polylines toggle. In the Conflict
Tolerance box, specify the value of the distance buffer that any
two of the sewer systems shouldn't violate. Optionally, use the
Station Crossing/Collision by Reference Centerline switch and set
the Reference CL to report any crossings and collisions by Station
and Offset from the reference centerline. The Use Collision
Navigator toggle provides an Data Problem Log dialog to navigate
you to the location of every collision, otherwise the collisions
would reported in Carlson standard report format.
Draw Collision Symbols and Draw Crossing Symbols option will
draw a symbol at each collision or crossing. Besides drawing
symbols, there are options to label the clearance and pipe
elevations.
The Order Rules button displays the Order Rules dialog,
allowing the user to specify and report violations of the "depth
order" of a set of various utilities. For example, if Gas is
supposed to be below Water, as indicated in the dialog below, but
is actually above, the program will note this as a violation and
report this in the Report Order Rule Violations formatted
report.
The Report Crossings and
Report Collisions buttons
would show all the pipe crossings and collisions in a formatted
report.
|
Sewer Network Collision Conflict
Check |
Opens the Report Formatter Options Dialog Box. The user can
select from the Available List and Add the to the Used list to
customize the report, ans select output options. For more
information on using the Report Formatter see Report Viewer in this
manual.
Opens the Report Formatter Options Dialog Box. The user can select from the Available List and Add the to the Used list to customize the report, and select output options. For more information on using the Report Formatter see Report Viewer in this manual.
When the Use Collision
Navigator toggle is on, an Data Problem Log is generated if
there are any collisions. Clicking to the "+" sign beside the
Collisions Total will display the individual collisions. When a
collision item is selected, click on Zoom To button and the drawing is
centered to the exact location of the highlighted collision.
Zoom In button zooms in on
the highlighted collision for a closer inspection. Zoom Out zooms out away from the
collision. Report All/One
button between One and All depending on whether a single collision
or all collisions are selected from the Log. An error Report is
generated listing the positions of the entities in
conflict.
|
Collision Navigator |
Collision Example |
Collision Report Example |
Pulldown Menu Location: Network > Check Sewer
Network
Keyboard Command: chkmswr
Prerequisite: two to four sewer files (.SEW)