This command creates a strata elevation grid file (.grd) with
faulting removed by adjusting an existing strata elevation grid
with faults and selecting fault lines from the drawing to process.
The purpose of this routine is to check that the fault lines are
defined correctly. When the fault lines are in the right places
with the right shift amounts, then the resulting grid model from
this routine should be smooth without shifting from faulting. The
Fault Influence Distance is how far to the sides of the fault lines
that the program will adjust the grid.
Pulldown Menu Location: StrataCalc
Keyboard Command: remove_faults
Prerequisite: strata elevation grid and faults