There are fourcommands for managing fence polylines. The fence
polylines are used by the Fence Diagram command as the horizontal
alignment. You can run Fence Diagram without pre-defined fence
polylines and pick the alignment polyline on-the-fly. One advantage
with using fence polylines is that you can specify the alignment
polyline once and then more easily select the fence polyline in
Fence Diagram which is useful if you run Fence Diagram multiple
times for the same alignment. Another advantage is that you can use
fence polylines to run Fence Diagram on multiple alignments at the
same time.
The fence polyline commands are Tag, Untag, Label and Identify.
The Tag Fence Polylines command prompts you to pick a polyline and
give it a name. This polyline is then flagged as a fence polyline.
The Untag Fence Polylines command removes the tags from the
selected polylines. The Label Fence Polylines command creates a
text label of the fence name in plan view at the start of the fence
polyline. This label is created in the current layer. All the fence
polylines in the drawing get labeled. The Identify Fence Polylines
command reports the name of the fence polyline. For Identify, you
can either report the names for the individually picked polylines
or have the program search the whole drawing and report the
locations and names for any fence polylines.
Pulldown Menu Location: StrataCalc
Keyboard Command: tag_fence_cl, untag_fence_cl, id_fence_cl,
fence_cl_label
Prerequisite: None