A common problem with calibrating maps on a large format digitizer is that if you leave the current drawing session, AutoCAD forgets the tablet calibration. Tablet save can be used to save the calibration when a drawing is taped down properly. This calibration file can be restored at any time later and be accurate so long as the drawing did not move on the tablet.
Save Configuration
Procedure:
1) Command: TABSAVE
2) Designate filename (*.TCF) to save configuration into.
Restore Configuration
Procedure:
1) Command: TABREST
2) Select filename (*.TCF) to restore configuration from.
Pulldown Menu Location: Settings > Tablet
Calibration
Keyboard Commands: tablet1, tablet2
Prerequisite: None