This command draws text labels for the specified fields along
the selected polylines with attached GIS data. The program starts
by selecting polylines in the drawing with GIS data. Then a dialog
appears for specifying the fields to label. This dialog displays a
list of all the table names found in the selected polylines. To
label a field, highlight the field from the
Available Fields list and pick the > button. Then use the
Up/Down buttons to order the fields in the Used Fields list. The
Erase Labels option will erase any existing field labels for the
selected polylines. The settings can be saved to and recalled from
a GIS settings file (.GSF) using the Save and Load buttons. Once
all the settings are ready, pick the Draw button to create the
labels. The labels are drawn along the polylines, and it is
optional to label on all segments, maximum length segment or at
interval. Also, it is optional to let the user pick label
location for each polylines.
Pulldown Menu Location: GIS Data > Label GIS Data
Keyboard Command: label_arc_text
Prerequisite: Polylines with linked GIS information