This feature allows you to place the bearings, distances, etc. in a
table instead of along the lines and curves in the drawing. This is
especially useful when space along the lines or curves is limited.
When you use a call table only the course labels are placed along
the line or curve to identify it in the table.
When you choose the Table > Call item
from the menu the Call Table Settings dialog appears. As with the
coordinate table, this dialog box allows you to enter: the layer,
text size and line spacing for the call table.
Drawing Settings
Layer: CG_Template Text size: 0.100 Line Spacing: 0.075 Use Foot symbol:
Checked
This setting will place a Foot symbol < " > if desired.
Course labels
First course label: The
course labels will be based on the First course label setting in
the Call Table Settings dialog box. The course label will then be
determined by incrementing the last character in the previous
course label starting with the first course label.
For example: line1 increments to line2, line3, etc. whereas line_a
increments to line_b, line_c, or as in the example above L1, L2 L3,
etc.
Automatically increment course
label: Check or Uncheck box
This setting will automate the process with selecting point
sequence
After configuring the settings in the Call Table Settings dialog:
Ok Button : select OK
Prompts
You will be prompted at the command line to enter the point
sequence.
Enter the point sequence by typing point IDs or by selecting
C&G points and/or lines on the screen.
Enter point sequence:
[cLockwise_curve/ccW_curve/Point_group/Reset/turn_Snap_on]
The Reset button: The ' R'
resets the last point to <None>
When you are done entering
calls: press <Enter>
This will end the input process and the call table will be drawn at
the cursor.
Move Call Table to desired
location: Drag the table and left-click the mouse button to
place table on screen. The course description will be placed in the
table and on the line or arc in the drawing.Pulldown Menu
Location: CG-Survey > CGDraw>Tables>Call Keyboard Command: CALT,
CG_CALL_TABLE Prerequiste:
Coordinate file