Import Mine Plan
This command allows you to import an Underground Mine Plan into a
drawing. The Mine Plan includes panel perimeters, panel names,
panel centerlines, and section data. This command can be used to
transfer planning information between drawings to evaluate multiple
mining scenarios.
The Mine Plan is created when you create the mining panels and
assign them to a piece of equipment in the Underground Mine Timing
command. The Mine Plan can be saved as a .ppi file via the Timing
Project Manager. To save this file, open the Timing Project Manager
(Underground Pulldown Menu > Timing Project Manager). Then
select the Mine Plan under the Mine Plan Information Menu. You can
then click ‘Export’ to save the Mine Plan as a .ppi file.
To import a Mine Plan, click Underground Pulldown Menu > Import
Mine Plan. Here you can select a .ppi file to import into the
drawing. Once the file has been imported, the basic linework of the
Mine Plan will be drawn. The below figure shows a simple Mine Plan
that has been imported into a new drawing. Notice that the panel
perimeters, names, and belt lines have all been imported.
Once the Mine Plan has been imported, you can use the Edit Panel
command to inspect the Section Data relating to the panels.
Pulldown Menu Location: Underground Mining/Underground
Keyboard Command: import_plan
Prerequisite: PPI file previously saved