This command takes a set of field and design/deed points and
creates an inverse report, such as radial stakeout, for each pair
of points. The Align functions combine a translation and rotation.
The Alignment Direction settings controls whether to go from the
survey points to the deed points, or vice versa. The command
includes a routine to find the best point to hold and the best
point to rotate to. This command provides tools for the correlation
of surveyed points with that of deed input points. Different points
can be specified as hold points, or rotation points, and provide a
report showing the bearing and distance of all sides of the
traverse/deed, based upon the hold and rotation points. This allows
for the review of different scenarios based upon hold and rotation
points. Perhaps two points in the field are in good shape, and seem
to meet all the descriptions thereof. You decide to hold these two
points as good, but you would like to see what holding these points
will do to each side/call of the tract/description. This is what
this routine is designed to do. In addition to allowing user
specified trials of different hold and rotation points, the routine
also provides a Find Minimum Rotation option that will report which
points specified as the hold and rotation points will result in the
minimum rotation of all sides of the tract/description. All points
must be contained in the same coordinate file, and the points to be
used in the correlation must be specified as either Survey points
or Deed points. The Use Report Formatter option chooses between a
fixed, automatic report, or a user-defined report format.
Edit: Edits the
highlighted Survey and Deed point. Once selected the dialog above
is displayed allowing for changes to be made.
Add Point: Click this
button to specify the points as either Survey or Deed points. Then
fill out the Edit Points dialog as desired.
Add Polyline: This function prompts to select polylines for
the survey and deed perimeters and uses the polyline vertices for
the survey and deed points.
Remove: Removes the
highlighted Survey and Deed points from the correlation setup. This
does not delete the points from the coordinate file.
Inverse Report: This
generates a report showing the inverse data from each point, both
survey and deed, to every other point specified in the correlation
set up. For example if there were four points in the survey points
(1-4) then the report would show inverse data from 1 to 2, 3,4;
from 2 to 1,3,4; from 3 to 1,2,4 and from 4 to 1,2,3. This
would be the same for the corresponding deed points.
Compare Before Align: This
option compares the survey information to the deed information.
Check Align: This option
that allows for user specified hold and rotation points, and then
reports the inverse data of each side of the tract/description. The
hold point and rotation point must be points from the specified
survey point group.
Find Min Align: Determines
the hold and rotation points that would result in the minimum
rotation to each side of the tract/description. When selected
the Minimum Deed Rotation Report is displayed.
Apply Alignment: This
option can be issued after the Min Align criteria is set.
Save: Saves the point list
to the current dcf file.
Save As: This option prompts for a user specified file name
and allows for a user specified location to save the file.
The file extension for the deed correlation file is dcf. When
executing the program you have the option of using an existing file
or creating a new file for the deed correlation.
After specifying the hold and rotation points, the deed correlation report will display again, showing the bearing and distance of each side of the tract/description.
Pulldown Menu Location:
Survey
Keyboard Command:
deed_align
Prerequisite: A coordinate
file (.CRD)