Saving Point dialog
This routine calculates section and 1/4 section
corners by two way control. Enter the point numbers for Point A and
B. These numbers can be entered in manually or picked from the
screen by selecting the Pick radial button at bottom right. In a
like manner, the Record Chainages from A to X and from A to B can
be entered manually or by using the Pick radial button to pick from
the screen. After selecting OK, a dialog box will display where the
Point number, description and elevation can be edited. The point
default settings determine the available data for editing. For
example, if the option for Automatic Point Numbering is turned off
in the Point Defaults, then the field for the point number will be
grayed out. If elevations are turned off in the point defaults,
then the elevation field with be grayed out. This also applies to
the description of the point as well. GLO is an acronym for
Government Land Office.
GLO Proportioning Two Way Control dialog
Saving Point dialog
Pulldown Menu
Location: COGO > Section Corners > GLO Corner
Proportioning
Keyboard Command:
cg_glo_two_way
Prerequisite: A coordinate
file