Hatch Sub-Areas

This command places a hatch pattern into polylines in the drawing that have been tagged with the Tag Sub-Area command.

Prompts

Hatch Name: Type in the name of a valid hatch pattern. A sample of the pattern will appear near the "Select Pattern" control.

Automatic Hatch Scale: Disable this toggle to manually control the size/density of the hatch pattern.

Hatch Scale: Specify the size of the hatch pattern. Larger Scale values create a less dense pattern.

Select Pattern: Use a visual dialog box approach to select a hatch pattern. The name of the hatch pattern selected displays in the Hatch Name control.

Select Color: Use a visual dialog box to specify the color of the hatch pattern.

Note:

• Any previous hatch patterns placed by the Hatch Sub-Areas command are first erased from the drawing.
• Hatch patterns are placed onto the LOTNET_HATCH_SUBAREA layer.

Pulldown Menu Location(s): Civil → Area/Layout → Lot Network Sub-Areas, Survey → Area/Layout → Lot Network Sub-Areas
Keyboard Command: hatch_subarea
Prerequisite: A closed polyline with appropriate Sub-Area data