Pulldown Menu Location:
Annotate > Line/Curve TableKeyboard Command: linetabl
Prerequisite: None
This command will compute line data and draw it in tabular form,
using the settings specified in Table Defaults. The program
computes the bearing and distance from a line, polyline segment or
between points. The current line table numbers are remembered
between drawings. The line is labeled with a L#, where # is the
sequential number of the line picked. The bearing and distance will
then be drawn in tabular form similar to the previous Curve Table
command. The Auto Annotate command can also create line tables. Use
the Table Header command to draw the column header of the line data
names.
Pulldown Menu Location:
Annotate > Line/Curve Table