This command labels the pit name and site name that are attached to the selected polyline. The Horizontal and Align placement methods will draw the labels in the center of the polyline. The difference is that the horizontal option will draw the label horizontal to the current twist and the Align method will rotate the label to follow the main direction of the pit. The Pick method prompts you for a center point to pick and an alignment for the text.
Text height <4.0>: press Enter to accept 4.0, or
type in a new text height
Include Site Name in Label [<Yes>/No]? press Enter
for yes or type N for no
Label placement method [<Align>/Horizontal/Pick]?
press Enter for Align, or type H for horizontal alignment, or P
to pick the alignment and location
Select pit polyline to
label: pick a polyline
Site Name: Site 1
Pit Name: Pit 1
Pick point for label: pick a point
Pick alignment point: pick a point
Select pit polyline to label: press Enter to end
Pulldown Menu Location: Boundary in the Advanced Mine
Module under Label Pit Polylines
Keyboard Command: pitlabel