This command calculates and labels the slope of a line, polyline segment, an entire polyline, or pair of points, as drawn on a profile. The command starts with the Slope Report Options dialog.
Slope Report Options dialog box
Horizontal Scale:Specify the horizontal scale of the
profile.
Vertical Scale:Specify the vertical scale of the profile.
Text Size Scaler:Specify the text size scaler.
Decimals:Specify the display precision for the slope labels.
Label Symbol:When checked, the degree symbol or percent sign
will be used in the label.
Label Arrow:When checked, a slope direction arrow will be
included.
Label Minus Sign:Will label a minus sign on negative slopes.
Label Format:Specify how to label the profile slopes. The
automatic settings means to use a percent label for any slope less
than 10%. and a ratio for any slope greater that 10%.
Label Method:Choose to label the entire profile at once or
to pick individual segments.
Reduce Profile Points:When checked, the number of labels
created on the profile will be reduced based on the Offset Distance
value. Applies only to the Entire Polyline selection option..
Offset Distance:Specify maximum offset between profile
vertices. Only available when Reduce Profile Points toggle is
checked on.
Prompts
Points/<Select line or polyline to list-label>:
pick a polyline
Slope Distance> 600.33 Horizontal Distance> 600.00
Elevation Difference: 20.00 Slope Ratio: 30.00:1 Slope Percent:
3.33
Starting point of label ([Enter] for none):
pick a point
Points/<Select line or polyline to list-label>:
press EnterIf you choose P for points, you go into the
Points mode and can label the slope of any pair of screen picks on
the profile.
Keyboard Command:llg
Prerequisite:A profile grid and profile polyline