This command allows you to set one or more pad elevations using
interior text labels.
In the Pad Polyline Options dialog box, you can choose whether
to have the new geometry created on a new layer, and if so, specify
the name for the layer. You also specify whether to trim any
elevated polylines crossing through the new elevated pad. You
also specify whether to horizontally offset the new polyline from
the original geometry, and if so, whether to offset to the inside,
outside, or both, and by how much.
The Snap Tolerance field joins linework which falls within the
range you set to create a pad.
Elevation to add to text values adds to the values from the elevation labels. Often, elevations are abbreviated to save time and space. If every elevation in a drawing is in the 500s instead of labeling every elevation 523.5, 543.3, 537.2 sometimes they are listed as simply 23.5, 43.3, 37.2. This command allows you to add a given amount, such as 500, to every label elevation to produce the correct elevation in the drawing.
Select layer sample of
elevation text: pick a
label text
Selected text layer ----TX07
Select layer sample of boundary linework: pick a pad polyline
Selected linework layer PAD
Select another layer sample of boundary linework (Enter to
continue):
Select text and linework to process.
Select objects: select pad
and text entities
Analyzing entire selection...
Set elevation for 1 polylines.
Pulldown Menu Location: 3D Data
Keyboard Command: pad_by_text
Prerequisite: Pad polylines and elevations