Assign Contour Elevations: From Contour Labels

This command allows you to set elevations to contours from elevation labels.

Select a sample of the elevation text to be used on the contouring. Next, select a sample of the contouring that you want to add the elevations to. Now select all the contours and their corresponding elevation labels and press Enter. Carlson Civil will then add elevations to all the contours. You may be prompted to distinguish what contour goes with what elevation label. You can either press Enter to accept the contour that Carlson Civil has selected or you can Press N to choose another contour.

Prompts

Select sample of elevation text: pick an example text elevation
Select sample of a contour line: pick an example contour polyline
Select contour lines and elevation text to process.
Select objects: select the entities to process
Joining adjacent polylines...
Reading the selection set ...
Joining ...
Pre-processing entity #1008 of 1008
Filtering text entities
Processing elevation text #518
Conflict detected: pick contour corresponding to current elevation text
Press N for next selection or Enter to accept current:
Remaking polyline #311

Pulldown Menu Location: 3D Data > Assign Contour Elevations
Keyboard Command: txtcelev
Prerequisite: Contours and contours labels