The Report button is used for detailed inspection of the GeoFluv™ Current Channel's design characteristics.
The report is for the channel as it would be incorporated into the design after using the Draw Design Surface button on the Output tab. Note that the channels with slopes >-0.04 do not have the meandering channel geometry relationships that lower slope channels do. Their different characteristics are designed differently in the GeoFluv™ approach and because of this radius of curvature, meander length, meander belt width, and meander width ratio are not listed.
The user left-clicks on the Report button and the "Channel 'xxxx' Report Options" dialog box opens. The user can type in the desired station interval for the report in the "Station Interval:" window. The user then left-clicks on the OK button and the report for that channel is generated according to the user-specified stationing.
The report gives summary design information for the Current Channel and lists channel-reach detailed information at the user-specified station intervals. The stationing increases in the downstream direction with station 00 being the channel head.