SEDCAD Draw Flow Polylines

This command draws polylines in the SEDCAD layer that represent flow lines. When drawing a network of flow lines, first draw the main branch. Then begin drawing the other flow lines from the top of flow and use the Join option to connect onto the main branch. Draw Flow Polylines is the first command in a series that produce the Junction, Branch, and Structure labels for SEDCAD.

Prompts

End/Pick point: pick a point
Undo/End/Join/Pick point: pick a point
Undo/End/Join/Pick point: pick a point
Undo/End/Join/Pick point: press Enter
Draw another flow polyline (<Yes>/No)? press Enter
End/Pick point: pick a point
Undo/End/Join/Pick point: pick a point
Undo/End/Join/Pick point: Join
Select flow polyline at place to join: pick the main branch at the junction
Draw another flow polyline (<Yes>/No)? No

Pulldown Menu Location: Watershed > SEDCAD Structure Layout
Keyboard Command: sedcad1
Prerequisite: None