Report Hydrograph

This command reports a hydrograph from a hydrograph file with the extension of:

• .h1 - *.h1 files are created by SEDCAD, Hydrograph Development, or the Single Runoff Hydrograph commands.
• .hyd - *.hyd files are created by all commands under Watershed → Hydrograph Routing menu and sewer network hydrograph routing programs.

After specifying the desired hydrograph file, the following dialog box is presented:

Hydrograph Values and Graphical Representation: The Time vs. Flow values for the hydrograph are displayed in a list and a graphical representation of the hydrograph are provided.

Peak Flow and Time: The Time to Peak (T_p) and Peak Discharge (Q_p) are provided.

Report Decimals: Indicate the desired level of Precision to be displayed in the Text Report.

Use Report Formatter: When enabled, this control displays the Report Formatter Options dialog box that gives you greater control over the content and type of report you would like to produce.

Report: Displays a hydrograph report showing Time vs. Flow values.

Draw: When clicked, a graphical representation of the hydrograph will be placed into the drawing through the functionality found in the Draw Hydrograph command.

Pulldown Menu Location: Watershed
Keyboard Command: viewhyd
Prerequisite: A hydrograph file