Import Carlson Sewer Network

In certain scenarios, it may be desirable to combine the contents of one Carlson sewer project file into another sewer file and form a more comprehensive Carlson sewer project file. The Import Carlson Sewer Network routine will import selected contents of a Carlson sewer file (.sew) into the active sewer file as defined via the Set Sewer File command or the Sewer Network Settings command. If an active sewer file has not been set, you will first be prompted to select an active sewer network file and will then continue with the command as described below.

Browse to the folder location where the Carlson sewer file resides that you wish to import into the current sewer file.

Use standard Windows click, shift+click and/or ctrl+click functionality to select the structure(s) that should be imported.

Note:

• Any structure names found in the incoming sewer file that are also found in the active sewer file will not be imported.
• After being imported, the network can be drawn into the drawing via the Draw Sewer Plan command.

Pulldown Menu Location: Network > Sewer Network Utilities
Keyboard Command: impswr
Prerequisite: Existing Carlson Software sewer file (*.sew)