This command is a manual alternative to the Auto linking method found on the General tab of the Sewer Network Settings. This routine compares the sewer network structure locations to that of the reference surface and centerline(s). The current sewer surface file is used as the elevation reference for the structure rim elevations.
Each structure has the option to assign a reference centerline and the structure will record the station and offset from this centerline. If this routine finds a difference between the structure location and the referenced centerline, an option will be provided to either update the sewer structures to their new and relative station/offset or simply leave the structures where they are located.
For reference surface changes, the structure rim elevation can be updated and there are two options for updating the invert elevation. One method is to hold the structure depth and change the invert elevation. The other method is to hold the invert elevation and change the depth.
Pulldown Menu Location: Network → Check Sewer
Network
Keyboard Command: chkswrref
Prerequisite: Sewer (.SEW) file